Recent content by drenched

Thanks rodders and jj. The model is a s5456x2gb/40 nearly 20 years old so mustn't complain. The relay is similar to the one jj mentions so will go with that. Thanks to you both for the assistance

Trying to repair my neff dishwasher and have found a blown relay on the pcb. Relay is sre 0303006 10A 250VAC 6VDC with 5 pins. Seems these were available in the past but not so now, so does anyone know of an alternative relay.? Will take a higher current version as these relays burn out fairly...

Hi all Before the meter came I did another check with multimeter in the loft and was getting approx 1.3. I split the circuit in the loft into upstairs downstairs and isolated fault to upstairs which had nearly all wiring for in the loft. Went round all connections and wiring and lo and behold...

Morning John/Eric Thanks Eric I will get one of those. System is TN-C-S with about 3-4 ohms between earth and neutral at the cu so just a question of getting for the meter.

Hi Opps You are quite right to highlight my poor grammar and I will endeavour to remedy that in future posts. John Before working in the cu I turned off all circuits and then the main switch. Did the work on the neutral and earth of the affected side and then only energised those ccts with...

Hi John Thought about a line to earth fault exported from other ccts but the rcd for other circuits held and that also discounts a borrowed neutral from the other ccts ---well I think it does. best regards

Hi all. I am new to the site so please bear with me. I am not a registered electrician however my background is armed forces electrical technician and then medium voltage supply and terminations bu tnot a jointer so I am electrically savvy in most aspects. I am now retired. Got up the other...