Recent content by ds7775

Hi all, As the title says,i am wishing to purchase a half decent programmable room stat to replace my box standard drayton stat, the boiler is newly fitted - a worcester bosch 34 cdi , something like a Horstmann Centaurstat 7 Room Thermostat is what im considering? Thanks ds7775

so..... any hints/tips/guides welcome ! i reckon ill tackle this one myself !

the timer works fine, just this stat is issue..... you reckon its a straight forward job to put right? prob just wired to wrong block/connector.

or ....can any body shed some light on the wiring side of things? Thanks

HI, Please could someone clerify just when a thermostat should work? i have a drayton timer and seperate stat. At the moment , if my timer is set to OFF and i turn up the thermostat,this then calls for heat and heats the rads. where'as before my new boiler was installed,when the...

just tried again now i am back home, i turned the heating on , the burners came on for about 20 seconds then shut down, so i turned the CH temp to full and all the rads are now bouncing hot ! seems i have no temperature control ? is a divertor valve or temp sensor something the average...

HI All, I have a Potterton Puma 80 , the hot water seems ok ( all be it a little too hot ),but when i use the central heating the boiler fires for about 2 minutes then stops, if i turn the heating knob to full,then the boiler fires and all rads heats up. it seems like the actual...