Recent content by dschlenz

I have 13 radiators, none of which have individual thermostatics valves. The house is approx 1700 square feet. I only moved into this house recently and my first quarterly gas bill was £750 so I reduced the dial on the boiler from the max setting to 3 thinking that might help. Obviously need...

Thanks for the swift replies! In answer to the first question I dont' have any thermostatic radiator valves at all. Also the radiators do stay hot when the burner indicator is off. I've currently got it set to 4 which shows a max of about 55 on the LED, do you recommend I increase to 5 so...

Had trouble posting yesterday so it duplicated.

Hi All I have a Worcester Bosch 40CDi and I'm a bit worried its not working as designed. I have set my thermostat to 20 degrees on a timer and as expected when the temperature goes below 20 degrees in the correct time slot the Burner Indicator comes on and the radiators start to warm up. The...

Hi All I have a Worcester Bosch 40CDi and I'm a bit worried its not working as designed. I have set my thermostat to 20 degrees on a timer and as expected when the temperature goes below 20 degrees in the correct time slot the Burner Indicator comes on and the radiators start to warm up. The...

Hi All I have a Worcester Bosch 40CDi and I'm a bit worried its not working as designed. I have set my thermostat to 20 degrees on a timer and as expected when the temperature goes below 20 degrees in the correct time slot the Burner Indicator comes on and the radiators start to warm up. The...

Hi All I have a Worcester Bosch 40CDi and I'm a bit worried its not working as designed. I have set my thermostat to 20 degrees on a timer and as expected when the temperature goes below 20 degrees in the correct time slot the Burner Indicator comes on and the radiators start to warm up. The...

Thank you all for your help, I'll give it a go.

Thanks for getting back to me boilerdoktor. So just so I'm clear (really paranoid about blowing the PCB), I remove the connections on ST10 on the boiler and then add the link which I suspect is a U shaped piece of metal between LS and LR? Where would I get this link from? Thanks again...

Hi, I've just bought the DT10RF. I'm pretty sure I've installed it correctly and as recommended here I've left the wired thermostat wired into ST10. However it would seem that my boiler is still taking commands from the wired thermostat and not the the wireless one. Am I missing something...

HI All I've been suffering from crazy gas bills so bought a Worcester DT10RF Digistat Mark II for my Worcester Greenstar 40CDi Boiler. I have installed the DT10RF and wireless thermostat with no issues. The problem I've got is that the old thermostat (Honerywell 3-wire) is still wired into...