Recent content by dsinclair999

Hi, I have exactly the same problem. I have 2 sets of mixer taps, cold water fine but turn to hot and not a drop!. CH working fine. Have tried resetting the boiler and switching off at the mains, still no joy. Wonder if anything to do with the very low temperatures we're having? Hope...

I dunno, this is sooo annoying :evil: If I have the heating up full, no noise, turn on a hot tap, no noise :D However, if the heating is turned down to any lower level, the noise is heard intermittently, turn on a hot tap and you get the noise straight away, every time! :evil...

I realise I haven't done anything to adjust the CO2 levels, and can't without the proper equipment, but I have lowered the preset level to the lowest level and that must surely mean the CO2 level would have to be reset. I assume after my adjustment the CO2 level will now be reading higher or...

Hi Tony, Ok, done it after a few attempts, the boiler preset for the CH is now set at 10.6, was originally set at 21.0. Unfortunately the howling continues when I turned on the hot water tap. Does this mean the CO2 level will have to be re-adjusted to match this lower setting? Might it be...

OK, I'll give it a go. One last question, is there any way to check what the preset power setting is currently set at? Thanx again DS

Hi, I think the mod has been done already! The installer was told to do this by the Biasi tech support, it involved cutting a 10mm hole in one of the pipes! Unfortunately can't get hold of the installer or Biasi because of the easter weekend, I was going to call and ask them to guide me thru...

Sorry that's all I know and that was with looking over the guys shoulder!!!

Hi, I have a Biasi Garda Plus HE combi M110.32SM/E. Every time you use a hot water tap (any one) you boiler gives off a loud foghorn type noise, which lasts for approx 10-30 secs!!. It does this with the CH as well, but intermittenly. It appears to happen everytime the boiler ignites if thats...