Recent content by dubrus

  1. D

    Flexicom cx30 water down flue

    Simon, I have spoken to the glowworm technical department a few days ago and there should not be any slope on my particular setup as it is probably 500mm or so as it is a new build house, so it should be level. The air inlet has a little bit of plastic moulded into it about 2" from the outside...
  2. D

    Flexicom cx30 water down flue

    Tony, I use it for my model helicopters for setting them up. The gauge unclips from the bracket and roughly the size of a matchbox. http://www.fast-lad.co.uk/store/align_ap800_digital_pitch_gauge_het80001-p-17933.html You can find cheaper ones/copies on eBay for less than £10, they are not as...
  3. D

    Flexicom cx30 water down flue

    Little update. The flue is going uphill confirmed. It is 3.5 degrees which is obvioulsy not level, close but no cigar. I have a small digital pitch gauge I could put on the end if the flue outside the house. The installers are coming tomorrow to level the flue, which should stop water running...
  4. D

    Flexicom cx30 water down flue

    Hi guys, Thanks for replies. To clarify what the service engineer said, he doesn't think it is level and it needs to point down from where it is....I.e make it level. I am far from an expert on this so I can only take people at face value when I call a company out. However, I can confirm the...
  5. D

    Flexicom cx30 water down flue

    Hi all, I have a problem with my boiler as per the title. Btw, it is a direct rear flue boiler if that makes any differenece. Maybe once a year or so, or when weather is just right anyway, I end up getting quite a lot of water down the flue when wind and rain is battering the side of my house...
Back
Top