Recent content by Dylanmaintenancematters

I need to add that the smaller consumer unit is fed by a 4mm armoured cable,and then 2.5 to the immersion,and that it is a copper cylinder which is an indirect (it has a coil for hot water from an Arga with back boiler). thanks!

my under standing of the fusing of an immersion is that a fused switch is 13A.My generator is 10KVA it actually has an 18 KVA alternator so it can never be over loaded,the genny would stall first, as it runs at 1500 RPM.It has two outputs a 32A and a16A,it also has another which is 110V plug...

I just dont know how to use a multi meter,I live off grid and have a diesel generator and inverter with 12x2V deep cycle battery set at 24V, I am quite capable and have in fact built the whole system my self from scratch,the main output from my genny which is 10 KVA is 32A and goes through to...

Hello, I have a faulty immersion heater, the element is a new one I fitted after this fault showed but still the problem persists.I used a neon to check for power supply????Having read some of the pref posts on this forum,I used a multi meter.But unsure of how to check the voltage.I have still...

currently building holiday break tree houses in mid Wales