I got a corner version of the one below. Unlike the horizontal one (typical white one) the vertical one you can feel the heat from all parts of the room :D
The vertical one is about 1000 btu’s less then the horizontal one and 100 times better. 8)...
Hello
When acclimatising solid wood do you keep the wood in its boxes or do you unpack and stack them up :?:
The wood will be 760mm by 92mm and 18mm thick
Thank you in advanced :)
Hi
Yes the chipboard floor is floating (on polystyrene 30mm) there are no joist underneath.
The boards warp upwards where they join (on the tongue and groove) and dip in the middle :?
The chipboard (18mm) is on polystyrene (30mm) which is then on concrete (ground floor).
I thought if I use a belt sander to make the floor even as possible then screw down 5.5 mm of ply.
And then secret nail or now even glue :?:
Hi WoodYouLike, thank you for your reply
What would be the best way to level/even the chipboard given that most of the boards have curved downwards in centre (looks a bit like rolling hills of Wales) :cry:
And would parquet adhesive bond well to chipboard?
Hi
I’m thinking of laying some solid IPE: Length 760mm, Width 92mm, Thickness 18mm and prefinished.
The room are 5X4 square meters and there’s a hallway 5X1 square meters.
I have lifted the carpet and there is chipboard underneath. The boards are quite uneven.
I would like to secret...