endecotp's latest activity

  • E
    endecotp reacted to dilalio's post in the thread Radiator Sludge with Thanks Thanks.
    https://www.installeronline.co.uk/heating/top-bottom-opposite-ends-tboe-trv-installation-what-installers-need-to-know/
  • E
    endecotp replied to the thread Radiator Sludge.
    Swap the pipes around near the boiler. Yes. If they ask why, show them the connection diagrams for the old and new boilers. If they...
  • E
    endecotp replied to the thread Radiator Sludge.
    Volkera - left two pipes are return and flow, respectively. Baxi: leftmost pipe is flow, rightmost pipe is return. WRONG.
  • E
    endecotp posted the thread Epoxy in Tools and Materials.
    https://xkcd.com/3194/
  • E
    endecotp replied to the thread Wiring a relay to protect a programmer help..
    If the TADO contacts are rated 6A and they fail so frequently, I’d use a 30A relay. You should also consider whether the pump is on its...
  • E
    endecotp replied to the thread Wiring a relay to protect a programmer help..
    You can install it anywhere convenient, where you can intercept the necessary wires. I.e. the wires to the TADO receiver and the wires...
  • E
    endecotp replied to the thread Wiring a relay to protect a programmer help..
    I would not recommend that.
  • E
    endecotp replied to the thread Wiring a relay to protect a programmer help..
    Anywhere that is convenient, where it will physically fit, and where it is safe to do so. In particular the relay in their photo has...
  • E
    endecotp replied to the thread Radiator Sludge.
    Anyway…. I’ve just looked at your first post again and I see that the previous boiler was a Vokera. I do have a recollection of a post...
  • E
    endecotp replied to the thread Radiator Sludge.
    “Just change all the radiators” about the same price as swapping the flow and return pipes at the boiler????? This is a DIY forum. My...
  • E
    endecotp replied to the thread Radiator Sludge.
    Well, whatever the history, it is certainly wrong. Fix it by adjusting the pipework wherever is most convenient, likely at or near the...
  • E
    endecotp replied to the thread Radiator Sludge.
    Feel the pipes at the radiator. The one that get warm first is the flow. Of course you shouldn’t need to do this, but…….
  • E
    endecotp replied to the thread Radiator Sludge.
    BTW: which thermal camera do you have?
  • E
    endecotp replied to the thread Radiator Sludge.
    They quickly remove the old boiler and dump it in the garden. Now they’ve got a load of pipes sticking out of the floor and a boiler...
  • E
    endecotp replied to the thread Do radiators need to be installed exactly level?.
    Are you sure that’s not the inlet side? (I’m unsure.)
Show older items
Back
Top