ericmark's latest activity
-
ericmark replied to the thread Lights flickering.From Wiki on this forum lights tend to be daisy-chained ceiling rose to ceiling rose, a tester like this may find which is last... -
-
ericmark replied to the thread Earth question - Shaver socket.If we have food which is bad, we can get ill as a result. If we know a freezer has failed, we will dump the food, or at least not...
-
ericmark replied to the thread Earth question - Shaver socket.I would think there are many more times when the supply has tripped before anyone has had a shock than tripping while someone is getting...
-
ericmark replied to the thread Tool recommendation for cutting 25mm cable entry.If the hole already exists as 20 mm, I use a cone cutter.
-
ericmark replied to the thread Car battery jump starter recommendations.I was rather disappointed with the lithium jump start pack. It said how it could be damaged if cranked for too long etc. And I don't...
-
ericmark replied to the thread Wiring thermostat hub with boiler.Bosch do seem to copy and paste parts of their instructions, asking for things like Type A RCD protection on the supply. But also if you...
-
ericmark replied to the thread Wiring thermostat hub with boiler.I like the idea of being able to simply unplug the central heating boiler in the event of a power cut, and plugging it into some other...
-
-
ericmark replied to the thread Switching from Danfoss to Drayton WT734.Looking at this, 9 and 10 seem to be from the thermostats. I would think you can trace the 2 black wires and see what else is from the...
-
-
ericmark replied to the thread Switching from Danfoss to Drayton WT734.If we look at the universal backplate with the likes of Hive and Drayton Wiser there are three options, with a combi-boiler the two...
-
-
ericmark replied to the thread Replacement LED Driver for 36v 12w.36 volts, 12 watts, and lamps could be in 125 groups of 8 with a resistor which would be 12 watt so fixed voltage, or 150 groups of 10...
-
-
ericmark replied to the thread Question about reinstating socket in shed.1) Location, Wales likely need to register the work, England no longer required I think. 2) Unless using a 10 mA RCD socket then...
-
ericmark replied to the thread Ideal logic combi 35 - hive setup?.Only DIY people can really answer, as an electrician I see no problem. I suspect there is a junction box somewhere, this is common...
