ericmark's latest activity
-
ericmark replied to the thread Central heating.@denso13 I have been told so many times things like I have not read exactly what it says, only the official guidance, so maybe I have... -
ericmark replied to the thread Wiring a relay to protect a programmer help..I had a problem with two pumps and stopping back feed and I used one of these which was no longer required, with a relay like this...
-
-
ericmark replied to the thread Central heating.Yes, you make a good point, people want to cut corners, and will read laws and regulations to suit what they want to do, rather than...
-
ericmark replied to the thread Carbon Monoxide Alarm XC70 renewing the battery?.Correct.
-
ericmark replied to the thread Carbon Monoxide Alarm XC70 renewing the battery?.Yes, that does seem likely in a granny flat. Need to find out more, heat alarm in flat's kitchen it seems is linked to smoke alarm in...
-
-
ericmark replied to the thread Central heating.Had same problem with mother's house, long large radiator along the wall, then a doorway, then the thermostat then another door. Theory...
-
ericmark replied to the thread Loose Connection.I see the problem, I do have the pliers, but it does not have all the crimps, so likely need a soldering iron to continue using the...
-
-
ericmark replied to the thread What to do with presents from our cat..Through the dog flap? If I did not have a cat flap, they could not bring them in. I do sometimes wonder about locking the cat flap, I...
-
ericmark replied to the thread Central heating.circulates the water. lowest that will work this is controlled by the thermostatic radiator valve (TRV) and lock shield valve in the...
-
ericmark replied to the thread Electrical connection for a gas oven.Be it a socket or a fused connection unit (FCU) easy enough to get a supply for spark igniter, but also with gas there needs to be some...
-
ericmark replied to the thread Which Type of Boiler / System?.I had some cold radiators when I moved to this house. The reason was very simple, the heating had not run for long enough. As each...
-
I have heard a couple of reports from people living in Kent that have been without water for days / weeks who have no heating now as...
-
ericmark replied to the thread Shed Termination.Most sockets will take two 6 mm² at least MK say they will, but it was just a suggestion, it in my case saved having a hole in the floor...
-
-
ericmark replied to the thread Shed Termination.Not really, my supply is from a 16 amp RCBO so shed has a 16 amp supply, I could have used a 20 amp RCBO in the same way, I wanted a new...
-
ericmark replied to the thread Shed Termination.I fitted a double outdoor socket to the outside of the shed, and used that to terminate the SWA,
