ericmark's latest activity
-
ericmark replied to the thread Help understanding radiator measurements.One would assume the system was designed rather than thrown together 27 years ago, so why is there now a problem? I had the same, and... -
ericmark replied to the thread Central heating layout. This should work, right?.Even if you had all the heads marked, it's not a simple yes or no, in real terms suck it and see. Even the direction of filler pipe can...
-
ericmark replied to the thread Is this article a Red Haddock ???.Well put @Harry Bloomfield I did look at cheaper mechanical TRV heads. The ones I removed, when tested, had about 3°C between fully...
-
ericmark reacted to Harry Bloomfield's post in the thread Is this article a Red Haddock ??? with
Like.
Perhaps Eric has the 'one' TRV, where the room temperature needs to be closely maintained at the correct temperature, rather than... -
ericmark replied to the thread 80A PME Fuse.I did say that, only once have I needed to look at the let through current, where the loop impedance was too low, decided to fit a 20...
-
ericmark replied to the thread Is this article a Red Haddock ???.Because I have not paid for TRV heads which link to a hub. I got 5 of these, and had 4 of these taken from my late mothers house, the...
-
-
ericmark replied to the thread Economy 7 clock wrong.I left the RSGB when the UKRS started, I was a founder member, then RSGB removed objections to dropping morse code, the whole reason for...
-
ericmark replied to the thread 80A PME Fuse.I note there are two figures given with the likes of RCDs, one in the working amps, the other the fault amps, often something like 6kA...
-
ericmark replied to the thread Is this article a Red Haddock ???.Oh, I remember delivering butter in the 70s, most we could throw the boxes off the wagon, but one make, I can't remember which, had to...
-
ericmark replied to the thread Hamilton dimmer to 2way switch.Are you sorted then? I was being careful, as my Energenie light switches in two-way mode, use a master and slave system. Never seen...
-
Thanks Sunray, yes effectively the dimmers are one way. I made a mistake here. The existing rocker is two way as i have another switch...
-
ericmark replied to the thread As regular contributors, are we a form of let me google that for you?.I tried to write an instruction set, to better the one done by @RF Lighting and failed. I just end up waffling on and on, I have to...
-
ericmark replied to the thread Room temperature?.I see the problem, we are looking at how the air circulates, not just a spot temperature. So heat leaves the top of the radiator, goes...
-
-
ericmark replied to the thread Neutral-Earth Voltage 120V.Excellent idea, so simple, can't think why I did not think about it.
-
ericmark replied to the thread Cable Entry Shed.I fitted an outside socket and used that as my box to change from SWA to T&E cables.
