ericmark's latest activity
-
ericmark replied to the thread Electric boiler?.No, this is my point, fill a bath, and looking at fuel cost, but if you need 1 pint of hot water, and to get it you need to run off 4... -
-
ericmark replied to the thread Set TV to watch Freeview (& Other Free Channels) Only.People are always getting upset with me, but quick look at you and so seems most people like your posts.
-
-
ericmark replied to the thread Electric boiler?.Yes, I would agree. But I would say CH and DHW are two completely different things. CH yes gas or oil, as any attempt to store and...
-
-
ericmark replied to the thread Neutral-Earth Voltage 120V.I find moving the device I can see how close or far away the cables are. Not really what the voltage is.
-
ericmark replied to the thread Flickering LED Tape.I used this and it has worked fine. The strip is clearly designed to dim, but the TCP has only one white temperature, left, plus colour...
-
-
ericmark replied to the thread Neutral-Earth Voltage 120V.With new ones yes, not back in 1980 when I first came across them. I found the cheap stick type does not have a graded response. Both...
-
-
ericmark replied to the thread Neutral-Earth Voltage 120V.I did show my NCV tester, it is part of the clamp-on meter, where the two jaws meet, so not really going to help using fingers.
-
ericmark replied to the thread Ceiling Rose Headache.I have counted three browns, and two blues, so it seems a blue is missing. I would guess the missing blue would be over sleeved with...
-
-
ericmark replied to the thread Neutral-Earth Voltage 120V.I note the new breed, but seems it needs batteries the hole idea was a tester which could not be turned off, or fail due to depleted...
-
-
ericmark posted the thread Battery size for angle grinder IAN 485600_2501 Parkside (Lidi) in Tools and Materials.Not official been given it yet, it will be my birthday present. So not got the instructions out of the box. So did a google...
-
-
ericmark replied to the thread Setting up a new TV?.I have just found the bit on the TV so it will switch on with the Sky box, On the TV Inputs HDMI CEC needed clicking on.
-
ericmark replied to the thread Set TV to watch Freeview (& Other Free Channels) Only.Thank you, @mattylad seems I got it wrong I assume "installed" means plugged in? But it does mean a TV set and a monitor and computer...
-
ericmark reacted to Lucid's post in the thread Set TV to watch Freeview (& Other Free Channels) Only with
Like.
You've had the benefit of my advice when you had equipment issues previously, here and on another forum. I even offered to call in on... -
ericmark replied to the thread Probably a stupid question, but....As @JohnD says, proving dead is a long-winded process for items one can't unplug, and likely most of us don't follow the process to the...
-
-
ericmark replied to the thread Neutral-Earth Voltage 120V.I have worked on a Robin tunnel boring machine which had delta 3 phase 220 volt, with no earth reference, and it is not something I want...
