ETAF's latest activity

  • ETAF
    ETAF replied to the thread Removal of radiator no bleed valve.
    what do you mean by if thats what i think you mean - then you drained the system down - not the radiator at all - if off see image...
    • 1000114586.jpeg
  • ETAF
    isnt it good practice to wire the screw bulb holder so that live is at the bottom center ?
  • ETAF
    make sure, when you do, you get someone highly recommended to you a lot of EICR scams around - where they condem the installation for...
  • ETAF
    i would say the right connector with 2 wires are neutral and the one on the left is a switched live here is an example of how the...
  • ETAF
    ETAF replied to the thread Best way to wire these lights?.
    you probably have a juncion box in the ceiling anyway - to take the LIVE down to the switch and then back from switch - possibly to the...
  • ETAF
    how about remote plugs
  • ETAF
    dont know what scotland is like and if any access issues seems high to me , but when i had this done on a bunglow was just before covid...
  • ETAF
    ETAF replied to the thread Flush fit ceiling light.
    if they dont have a connector to daisy chain , then you just take the drivers power to a junction box and from there to a switch is...
  • ETAF
    ETAF replied to the thread Fitting light switch question.
    you can use an intermediate as a 2way as far as i can research - Never done that - i think as i dont know how its all wired up and its...
  • ETAF
    ETAF replied to the thread Fitting light switch question.
    is it only 2 switches that control that light - or do you have 3 you have an intermediate switch in the picture a 2 way does not replace...
  • ETAF
    ETAF replied to the thread Fitting light switch question.
    i gang 2 way - has 3 connections points available pictures of old switch and new switch may help - with wiring does it also have...
  • ETAF
    ETAF replied to the thread Flush fit ceiling light.
    i get a lot of shadows in my garage workshop - where i have 2 LED Tubes - Daylight colour - and so I also use a couple of lights on a...
  • ETAF
    ETAF replied to the thread Flush fit ceiling light.
    peter millard did a video years ago white is 4000K and not daylight - looking around 6000k for daylight which i prefer i have fitted a...
  • ETAF
    ETAF replied to the thread Self levelling over ceramic tiles.
    we had it done by a fitter special mixer for the screed - i think it may have been 1200...
  • ETAF
    ETAF replied to the thread Self levelling over ceramic tiles.
    we had F Ball screed put over our uneven tiles floow in a conservatory - not sure if this will apply to your situation...
Back
Top