Hi there
Thanks for your response.
um, cleats? what are these?something to hold the edge of the tub on to the wall baton?
I have tilled my floor underneath the bath, can i still use 4x2 wood to spread the wieght and put 1/2 inch holes in them to sit the bath in?
many thanks
Hello
I need a solid fail safe suggestion, if such a thing exists.......
I'm about to fit a new steel bath tub it has been suplied without fixing bracketsand there are no holes in the feet, which are small with little room for drilling and thick metal so difficult to drill anyhow.
It will...
can any one advise me please?
i am going to tile my bath room using 600mmx600mmx35mm some indian sand dtone tiles that my mother in law gave me.
the job is straight forward apart from the cutting.
how do i cut a circle out off a tile to go around the floor channeled soil outlet. and cut the...
hello.
i am in the process of fitting a central heating system and have got tot the point where i now need to buy the boiler.
i'm going for a combi. i have a two bed two story house with 5 rads can any one sugest the power of the boiler i should get? i have read on line that a Worcester...
i am in the process of a dpc.
just one question, the machine is happily pumping the chemical in to the bricks, how do i know when to stop and move on to the next brick?
thaaaaaaaanks :?
thanks every one, really helpful.
what are TVR's?
i've read that cutting into joists to lay pipes under floor boards(up stairs) weakens them. should i drillholes? but wont it prove difficult to feed in long lenghts of pipe?
so many questions. can i chase in down pipes oin to the walls...
hello people
i'm sure you've heard this a thousand times....
i have ambitions to instal a new central heating system in my 2 up 2 down terrace house, there is no existing system.
i'm going to use a combi, this will be plumbed by a pro'. i was wondering what level of power the boiler will...
does any one know where i can see the required regulations? are these for trades persons only?
also, the rewire will be of a small two up two down terrace house with a ten or twenty year old down stair bathroom extention. i'm interested in any ideas as to how i should go about the rewire...
i am considering a diy rewire and am aware that someone needs to be notified about my plans and has then to test it to certify it.
does any one know who i should contact?
thanks.