fixitflav's latest activity
-
Ffixitflav replied to the thread Plastic KETER sheds.There has to be a temperature difference between the grid and the air in order to dissipate the heat. The maximum grid temperature must...
-
Ffixitflav replied to the thread Plastic KETER sheds.I assume it's that with the installed compressor power there is a maximum heat flow, at design maximum ambient temperature, and minimum...
-
Ffixitflav replied to the thread Plastic KETER sheds.You've been reading your Karl Popper!
-
Ffixitflav replied to the thread Plastic KETER sheds.So would I
-
Ffixitflav replied to the thread Plastic KETER sheds.I wouldn't disagree with that :giggle:
-
Ffixitflav replied to the thread Plastic KETER sheds.Well yes, there must be a limit on ambient temperature above which it can't do the job
-
Ffixitflav replied to the thread Plastic KETER sheds.As well as more heat entering when ambient is higher, it has to reject heat via the heat dump grid, which also gets harder. It seems to...
-
Ffixitflav replied to the thread Plastic KETER sheds.Good explanation! I don't think that's quite right, as lower temperature makes it easier to liquefy the refrigerant (in the heat dump...
-
Ffixitflav replied to the thread Tyre valve stem leak.As I said in #101, my current car has tyre pressure sensors installed in the valves (works very well). Tyre fitters don't mention...
-
Ffixitflav replied to the thread Tyre valve stem leak.Still not answering. I'm sure you'll be back for the last word, please yourself, I won't be reading any more of your idiotic posts
-
Ffixitflav replied to the thread Tyre valve stem leak.As usual, don't answer a question, just troll on.
-
Ffixitflav replied to the thread Tyre valve stem leak.I know you're just trolling, but earlier you said the reason you knew it was losing air was because it wasn't as round as it should be...
-
FRacing certainty the fitter wouldn't like you!
-
Ffixitflav replied to the thread Tyre valve stem leak.So you've no idea whether it's leaking between valve and rim or not. OK I know you're having a game
-
Ffixitflav replied to the thread Plastic KETER sheds.Yes, a bit odd there is a minimum temperature, I'd have thought the colder the ambient the less work for the freezer! But apparently...
