wont change up from 2nd to 3rd. But does when in tiptronic.
Also faults with asc monitoring and also a faulty speed sensor front right. Are these linked?
how much are speed sensors and how easy to fit?
regards
flipper.
My dishwasher has developed a fault. the model is a diplomat ADP8322. the machine bleeps constantly and the green light reverts to the rinse cycle. I have tried tilting the machine backwards as i have been told this will clear the fault which is an overflow sensor. This didnt work. Any ideas??
My dishwasher has developed a fault. the model is a diplomat ADP8322. the machine bleeps constantly and the green light reverts to the rinse cycle. I have tried tilting the machine backwards as i have been told this will clear the fault which is an overflow sensor. This didnt work. Any ideas??
After decorating most of my home and now seeing most of whats done crack and move, i'm now caught in a battle with my insurance company about subsidence. They have sent round a surveyor(my mum could have done a better job) who looked at my property over a year ago and the reccomendation was to...
thanks for all you advice. i will have a look at these and let you know how i get on. it does seem strange however that the engine will stall once and then run fine with no sign of any further problem. thanks again and Happy New Year!
523i bmw will run okay when first started but after about 5/10 min it stalls.
if the car is moving it hesitates quite badly a couple of times and then runs fine without any further problems. If the car is at standstill it will stall. when you restart it then dies again and then start again and...
yeah i drained the bleed tap on the botton of the boiler and it trickled out. iI fear that it could be the join from the f+e into the 22mm. This is behind my shower unit - oops!
i will also check what happens when i run 1 at a time.
Thanks for all you help guys!
When i brought the property i had to run both hw + ch to get anything. Seems that the f+e tank isnt filling the boiler. Also not sure about the 3 way valve. next step was to take all the rads off and flush through as they are very silted up. I will do this then try your first suggestion.
I've got an old coventional c/h system. f/e tank and hot water tank are in the loft. after loosing both hot water and central heating i fitted a new pump. now i have loads of hot water but no/very little central heating. i have back filled the system from a hose, and i dont seem to have any air...