Recent content by floater123

I have employed the Stuckinarut suggestion and ripped out the programer and stat and wired the Hive up as described direct from the boiler. I have also used RamdonGrinch's suggestion and removed all cable associated with these pieces of equipment. The result is an up and running Hive. I had to...

Thanks Stuckinarut. I think I will use your suggestion and rip out the stat and programmer and start again straight from the boiler. I will let you know how it goes when I have got some cable.

Thanks RandomGrinch for your suggestion. That is something I will keep in mind, but my preferred option would be to removed both stat an programmer and have the hive on the wall in their place, and to have the receiver in the loft near the boiler. Do you have a wiring suggestion for that option...

It’s definitely a combi boiler. The confusion my be due to the fact that we replaced the original boiler that had a tank connected with it, with the above combi boiler, but continued to use this programmer for heating but not for hot water as we were getting it on demand through the taps

Hi I am new to the forum, so bear with me if I don't get things quite right. I have the above boiler, that's attached to a Centaurplus C21 programmer and a Honeywell temperature gauge. I wish to take these out of the heating system and replace them with the Hive. I am no electrical expert, but...