Recent content by flybeething

Just to add this is the bracket I have: https://www.amazon.co.uk/dp/B003UVELA6?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0 (mod I guess it's okay to post this link??)

Hi Foxhole - thanks for the suggestion - I checked some brackets but nothing I could find that was cantilivered - also when I look a the back of my tele the standard VESA mounts don't appear to allow it to adjust it much else the vertical rail it sits on would only use one bolt. I am prbly...

Hi All, I have managed to get brain freeze on attaching a TV and bracket to a dot and dabbed plasterboarded chimney breast. The twist here is I previously located the plugs at a fixed height thinking it would be ideal for the TV. Cue life and trying to do a million other things and so now I...

Got it sorted - awkward access and put a cloth over the lever. The screw actually only held the lever over the spindle underneath but now I know not to close it off too often and keep it low (or just turn the temp down for the UF heating). Let's see how it goes. Thanks for the help in the forum!

@Madrab should I remove that screw inside to expose the spindle or leave it loose but connected to the twist lever and try to turn it with the wrench/spanner on that instead?

I was not as savvy back then and when installed by a registered gas safe plumber but yes I think in hindsight isolating into zones with some device would be better but I was told manual means they should never stop working due to an issue (fat chance). Ok will see if I can leverage carefully - I...

Hi all - it's getting cold again so I wanted to turn my underfloor heating valve back on. It was installed 5 years ago and has never had an issue - its connected to a Viesmann system boiler and at the time I did not get any wireless control valve that would have meant I could turn the UF heating...

Thanks both @mattylad and @big-all - will speak to solent but I dont have to open and close it alot so may go for the bolt option!

Hi there happy diynotter. I bought a parkside universal too stand / bench a few years ago when it was in the middle of Lidl. Sat in storage for years and then started using it with a mitre saw - really found it useful. At one point I was moving it around my shed when the left leg got caught and...