Recent content by FMH

Thanks tamz, I had to google that 'wgaf' 8)

Hi, I'm looking for a little advice regarding the above! I was viewing a property with has a valiant system boiler. Behind the bottom half of the boiler is tiling, but there is a chipboard panel above, it's probably covering the previous old flue hole. I'm sure the boiler should be mounted on...

"am i mising a more serious problem here ?" Yeah, tighten up the connections, go for a walk and re-tighten the connections again! copper wire is mallable. You'll now have to cut back the burnt ends or it could happen again.

I would leave it alone, although tell the joiner to screw (not nail) the boards down :lol:

There are companies on the net that can supply screens & doors any size 'made to measure' Depending on the excess he might be able to make a claim against his building insurance.

Run a small bead of clear silicone between the frame and the door to stop the movement, a small dollop will also secure the caps.

Lifting floors :mrgreen:

The threads on some are shorter! and torture if you use a 'basin mate'

NO NEVER... You have been caught out with your lack of experience, or laziness.

True he's probably got a sore knee bending all that 22mm copper for the scrappy :D

That all you can do, son? try harder,you`re not in my league, Thankfully not! :shock:

At least you measured the run :roll: It's not all bad news http://www.metalprices.com/FreeSite/metals/cu/cu.asp :D