Recent content by FoghornLeghorn

Dario I may be too late here to help you but thought I'd try. If you haven't already binned the CDI 1012 then try checking the safety switch. It's situated underneath just in front of the heater element connections. If it's faulty then it will not allow the heater to work. I've just renewed my...

For anybody that is interested - the last fault was the level switches. After another week of leaving the missus to wash up after our family of five boys while I worked away, I've just come back for the weekend, fitted new switches and the dishwasher is working again. Top Tip - Don't bother...

OK guys - I got to the bottom of my original problem with the drain pump running continuously. One of the level switches had a short circuit (albeit of 19k ohms resistance but that was causing the pump to continue running). Having stripped and reassembled the switch, the dishwasher now will...

There is no baseplate; any leaks would just go straight onto the floor. I have, however, made some progress with it. Going back to basics I double-checked everything and found that one of the two level switches had a short circuit in it...of 19k ohms!!! It seemed that was enough to keep the pump...

Hi everyone - I'm now quite stumped with this so any help would be hugely appreciated. Our Candy CDI 1012 was playing up last week so I had a play with it and diagnosed the safety switch and PCB. While playing around with it (tilting it, spilling water while removing parts etc) a new fault...