Recent content by G_4ce_uk

Thanks again and have a great day

Good morning. Thank you very much for all your help. Understand the point regarding single point of isolation, will be more involved, but achievable. Thanks again and have a great day.

I am sure the timer was a Worcester DT20- Digital Timer

Reference timer, there is one inside the boiler, but that is permanently on and never been set to timer mode. It’s a digital one.

Hi RandomGrinch, thank you for your reply. The wiring to the stat is not far from from a socket where a permanent live and neutral could be taken. I assume that would be fine. Once I get a permanent live and natural to the N & L connections on the left, would the existing black and red wires go...

Yes sure. Here are the wires

There is a red wire going to L and a black wire going to Y1

Good evening. I have recently brought a Honeywell EvoHome system and need some help with wiring in the BDR91 wireless relay box. I have a Siemens room stat that has 2 wires and need some help on how to wire the BDR91.

Anyway, new boiler fitted and all is now okay. Cheers for the help!

And whats interesting about that?!?!

Hi all, Please could someone advise, I have a Potterton Combi 80 that everytime you turn on the hot water, the boiler kicks into life and you can hear and see the sparking, but the flame does not light, no hot water comes out and the boiler locks out. If you push the reset switch and turn on...