Recent content by gaz1000gaz

Hi Ive just started painting my house outside. It is 30 year old unpainted pebbledash. Ive noticed that on the gable end of the house that i finished painting on Monday that there are lots of air holes appearing on most of the wall. Ive used a watered down coat, and 2 full coats of Dulux...

Hi Got the above gas hob - actual model number T26F66NO We cannot use the gas hob as the on/off button and spring have both popped out. The bottom of the button looks possible sheared off so assuming it should be connected to another plastic part which then touches a circuit board. Is...

really sorry for not replying sooner re the floor. Basically Devi say that the floor is capable of producing significant heat, however as long as we never go above say the halfway on the heat dial it should be fine. 12 months in and all good !!! Fingers crossed.

Thanks for the reply Having never used the fungicidle wash, do i literally paint the whole of the house or just the affected areas ? Can i roller it on ? Seems it could take an age ! Thanks Gary

Thanks Madder I may go for that - 100% undiluted. All the best Gary

Many thanks for the advice. Would it be cheaper/easier to paint on a standard antifungacide rather than mixing a weathershield base coat ? Thanks Gary

Hi I am about to paint a half rendered modern house. The ground floor is red brick and the first floor is smooth modern render - approx 15 years old. First, the render is sound and is good condition, currently an off white colour. It shows small signs of light balck spot mould in places...

Thanks Ricicle, I will look into this tomorrow - many thanks for the glimmer ! Speak soon Gary

Yes it was fitted and tested. The chap who layed the floor is a professional tiler and a good friend of mine. He telephoned the cable company whilst i was there and they said it was ok to use it. What more can you do. Is there anyway we can use some form of suppressor ? Thanks Gary

Hi Ricicle Sorry yes 230v. Cable spec says 400V. Can you help me with any suggestions ? Thanks Gary

Hi Flameport- yes it was deviflex - and it would appear one that is suitable for concrete / steps / pavements etc. When my tiler saw the cable - he rang Devi to ask if it was sutiable for a normal floor tile with 10mm insu board and 10mm adhesive - yes was the response. Only now, it would appear...

Hi Ricicle, Its a Devi Deviflex DSIG-20 sinlgle conductor loosewire floor. The spec sheet says the following Voltage 400v AC Effect 20 W/m Max temp 65 degrees We have run it directly into the fuse board The general problem appears to be the floor adhesive will get very hot (and i...

Hi Londonboy, No, unfortuantley the tiles will be wrecked when taking them up along with the underfloor heating, oh and £300 of 10mm insualtion board ! Nice thought though. All the best Gary