Recent content by gazsri

Tony my boiler has been serviced by a good gas engineer everything was 100% (not installer) an tested 98% efficent i have also have it booked for a full manufactures 2nd service cost off £100 by ideal this march including full clean out of the heat exchanger an replace if needed i aint that...

thats why your the plumber im the customer chap thanx

oops repost

nothing is ever 100% accurate i got 10ltrs 45 degC 52sec =12ltrs every 1min 4secs hardly life changing since i have have 5 yr warranty going to leave it till warmer weather if no change with it when cold feed in is that bit warmer then i will get on the ball to ideal again peter thanks for...

outside tap 10ltrs 42sec but thats one off them b&q clamp on fittings so restricted flow anyway thanx again

do you think what my boiler is doing is normal regardless of brand lol i said the C/H side perfect no problem this far

i def ain't mathmatically minded lol but i set the boiler to 45deg with tap full open it reach 42deg even if i move the dial up to 50 deg the boiler isn't going over 42 deg tap open full which up to now i never had a problem i know when the tap full open the boiler kicks in while the...

please tell me if i did this right i set my boiler to 55 degrees turned tap on full boiler reached 39 degrees no more while at that temp filled a 10ltr bucket just 50sec i also set the dhw temp to lowest 40 deg which boiler reached perfect with the tap open full and it felt like it at the...

definatly going down the right pipes the boiler light lights up an stays lit till tap off thats with the boiler a 58 degrees on the switch with tap full open max temp i was getting was 44 deg after 5 mins running but from tap off to just a quarter turn on tap 58 degree in a minute skin...

thanx peter i have a fernox f1 which i had cleaned an the fernox system cleaner an renewed inhibitor when i installed new radiator in the kitchen 8 months ago when the system was refilled there was dirt in the mains blocked filling loop had the mains disconnected an flushed before...

right guys i want no wise cracks plz i have a problem concerning my combi boiler wait for it "ideal logic +30" so i know what your going to say lol i had it installed march 2011 up untill now i have had no problems what so ever been great an very efficient 3 bed terrace 1 bathroom...

right chaps haven't had a chance to see your comments till now the spark had it wired to ebus so today i unwired the 2 switch wires from the ebus connect taken out the rf24 loop an put the 2 switch wires into that hay presto bloody works then the installer told he paid a spark £90 for that an...

this

believe me have no intention waiting 2 weeks

just pressed it there doesnt bring the boiler on