Thanks for all the advice so far.
The boiler was installed last year and worked perfectly until the end of the summer when we wanted the heating on for the first time. First of all we weren't getting any heating. The installer came and flushed out the system and that got the heating back on...
Have a problem with a Gloworm Ultracom 30 CXi boiler.
With all valves on the rads closed and the room stat turned down the rads stay cold - OK so far. If I open a valve the rad stays cold - still OK. If I turn the room stat up the rads with open valves get hot but some of those with closed...
Apologies for delay in responding, haven't been on here for a bit.
The chap who installed it found a bit of sludge in the system and now we have gone from one extreme to the other.
With all valves on the rads closed and the room stat turned down the rads stay cold - OK so far. If I open a...
Thanks - I have tried the manual override but not in the past couple of days. Will give it a try but I've been through the timer settings and tried about every possibility on the timer. It looks like something simple but I've already had an engineer take a quick look and even he couldn't work it...
Actually I need to elaborate - if I switch the boiler off and on, it seems to heat the water in the boiler to the right temperature - so I know it can fire up. Also the first 30cm of pipe coming from the boiler starts off hot then warm, then after that cold which seems to me like heat from...
Help - we recently tried the CH for the first time since before summer and although we get DHW the boiler doesn't fire up for CH.
Room stat clicks at about 23 degrees - have even tried replacing the stat but made no difference.
The internal timer on the boiler is disabled for CH although I...
WilfredoLimb - I have had the exact same problem with the same model boiler. I've tried replacing the room stat - still the same.
Did you get yours resolved?