GeddyMortgage's latest activity

  • G
    GeddyMortgage reacted to Johntheo5's post in the thread Bypass valve with Thanks Thanks.
    I thought the "gas supply" was a bit on the hot side allright at 27.6C.:giggle: I think you're next move will be to try and convince WB...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    Ah, I see what you mean… no, the 24.7 sensor display is in the middle but it’s metal sensor is inside some lagging wrapped around the...
    • IMG_4266.jpeg
  • G
    GeddyMortgage reacted to Johntheo5's post in the thread Bypass valve with Thanks Thanks.
    Slight hiccup?? The pipe where the 24.7C sensor is attached to is the GAS inlet I'm pretty sure and the Boiler Return is most certainly...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    Im not sure how to get the other ones to appear. Or do you mean run it again when the boiler is running / CH demanded?
  • G
    GeddyMortgage replied to the thread Bypass valve.
    I'll list out what it said below. Though first worth mentioning I set the A2 to 0 and it still did the jumping from 20 to 80% thing once...
  • G
    GeddyMortgage reacted to Johntheo5's post in the thread Bypass valve with Thanks Thanks.
    Let WB worry about the (if) 3 way valve. Write down or take a snapshot of these (especially temperature values).
  • G
    GeddyMortgage replied to the thread Bypass valve.
    Had a look on the inside, do you see anything resembling a 3 way diverter in there? I didn't but im certainly not technical. Also is...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    Then I’m right to feel like I was being palmed off. He was adamant the boiler was all perfect. But then ofcourse he would. It’s still...
  • G
    GeddyMortgage reacted to Johntheo5's post in the thread Bypass valve with Thanks Thanks.
    The boiler casing would need removing I would think to check for a 3 way valve. I have a feeling that some mix (or cock) up may occured...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    I’m going to try setting it to 0 tonight and see what happens. I’ll take a photo of the under side of the boiler. In our case it’s...
    • IMG_4249.png
  • G
    GeddyMortgage reacted to Johntheo5's post in the thread Bypass valve with Thanks Thanks.
    2-A2 if defaulting to 1 shows that there is a 3way valve installed, if so, then I'm not sure but it could mean that the boiler can be...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    Hot water comes from somewhere else. This is a CH only system boiler. 2a1 is showing as 0 on mine as default. And consistent with the...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    It's about 15cm below where the connection point of pipe to boiler is. So really close. I've tried now with 4 different instruments...
  • G
    GeddyMortgage replied to the thread Bypass valve.
    When it's running at 100% it uses about 34kw hr
  • G
    GeddyMortgage reacted to dilalio's post in the thread Bypass valve with Thanks Thanks.
    Something is not giving the correct readings. What's the gas rate on max?
Show older items
Back
Top