geeksy's latest activity

  • G
    geeksy replied to the thread Replacing light fitting.
    Thanks all, sorted. Ensured I unplugged wires from each block one time, tape them together and then next one and so on. It was then easy...
  • G
    geeksy reacted to EFLImpudence's post in the thread Replacing light fitting with Thanks Thanks.
    Mark the wires before disconnection. The same wires which are connected together in the rose must be connected together in the junction...
  • G
    geeksy replied to the thread Replacing light fitting.
    I may have to call an electrician as the ceiling rose needs to come off for the new clamp to be screwed to the ceiling and also cover...
  • G
    geeksy replied to the thread Replacing light fitting.
    lol :giggle: First time opened this since I bought the house 4 years ago.
  • G
    geeksy replied to the thread Replacing light fitting.
    Thanks for all the inputs. Better picture here I think. Plan is to cut the existing cable to the old light where marked as "x" in the...
    • 1706267580573.png
  • G
    geeksy reacted to blup's post in the thread Replacing light fitting with Thanks Thanks.
    Connect a length of green yellow conductor ( you can get 1.5mm from screwfix but it only comes in big reels), one end in the led...
  • G
    geeksy reacted to ericmark's post in the thread Replacing light fitting with Thanks Thanks.
    Normally the outer connections are the switched and neutral, but it seems swapped with yours, standard British wiring is to use the...
  • G
    geeksy reacted to ETAF's post in the thread Replacing light fitting with Thanks Thanks.
    i cannot see all the connections in the rose, out of focus image - but the green sleeve is / should be the earth , but would need...
  • G
    Hello, I am trying to replaced a ceiling light pendant with a LED lamp fitting. Existing bulb holder has two wires, blue and brown that...
    • ar1.jpg
    • ar2.jpg
Back
Top