Recent content by gekkoa

Successfully bled brakes using Gunson EAZIBLEED as recommended. Many thanks Noonespecial. In the end it was a simple and straightforward process.

Hi Noonespecial, 1)Pressurised bleed does sound more simple now it's explained to.Thanks. But just wondering where the cap is on the Master Cylinder - there are 2 pipes exiting the master cylinder - are we talking about detaching one of these and attaching the pressurised bleeding device...

Thanks for that Noonespecial - but am not too sure as to where (which bleed nipple) pressure should be applied. I wonder if it wouldnt be better to have a vacuum to draw the fluid thru to the rear cylinder. I wonder if you could clarify this. A mechanic friend of mine has been doing the...

HITACHIMAD, if I do the bleed nipple up before releasing the pedal, when Inext undo the bleed nipple the air rushes back in - in other words, I am bleeding properly but the system is not behaving properly. NOONSPECIAL, am interested in the 'pressurised bleeding kit' but would like to know...

I changed a rear Brake Cylinder on my Daewoo Nexia GLXi and then tried to bleed the brakes and was unsuccessful. When I push the brake pedal down air is expelled but when i release the pedal the air is sucked back in. If I push the pedal down and clamp the brake-pipe and then release the...

Thanks for that John. I have the ISUZU engine so am looking at 2 hours.

How do I replace cambelt in my Daewoo NEXIA GLXi? Can someone give me a brief outline as to how I go about it, and tell me if it is a difficult job or not and how long it will take. Many thanks