Recent content by GeoffWC

He has correctly guessed that I am in Ireland The wiring in the diagram is correct, here is a photo My setup looks similar to this thread, presuming the blue line is hot (using a voltage tester, it appears to be)...

Any ideas? Otherwise I'll just wire up a regular 2 gang and leave wiring alone, can't quite get my head around that setup - much appreciate any help!

I can take a picture later, but here is the diagram that matches the old and new wiring (note - L2 on the new switch does not have a terminal) Old wiring New wiring

I'll have to unscrew tomorrow and send over a shot but as discussed above - both live into the COM terminal, one line out into L1, one into L2

So I wired this up, and now the blue LEDs on the switch light up, but the lights themselves don't turn on. Any hints?

Thanks JohnD, I was hoping that might be the case as the wiring would be identical to Kirils original setup if all cables are live and makes a lot more sense. Will check with a multimeter - if all live, I've mostly seen live only smart switches with a single live in (the attached for example) -...

Hello - sorry to revive an old thread but I have not been able to find advice elsewhere and the above is the only similar wiring I've seen to mine I have a similar smart switch to the poster above, and lightswitch appears to have a neutral line I'm not sure how I would wire it up (one neutral...