Recent content by gilly99

Hello, am bashing through house in preparation for a refurbishment including new thermal store and air source heat pump. Not sure of the final specs of heating as yet (investigating available green grants / schemes etc), but I'd like to route the required cables now. Guess sizing of ASHP would...

Have got most flooring up and new studded walls installed minus last few sheets of plasterboard to allow for rewire routing. Should be an ideal job for a sparks & his mate. The CUs got some RCDs, but I use plug-in RCDs in anycase. So, I need to get re-wire to old CU, with enough cable to...

OK, thanks for looking. Here are the images First photo shows main steel gas feed - its fairly loose and looks to run under the floor boards (not buried, at least not until front door). Meter is against wall, main feed about 2ft out. No bond at all on my side. About 3ft...

For terminations & main equip bonding

Hi all - first post. Renovating a house & would like to move both elec & gas meters from understairs cupboard (now about 1.5m from front door) to front outside wall - a distance of approx. 4m. Southern Electric via Ebico supply both services, although elec is pre-payment type & I would also...