Recent content by gj71

It is defo the front cover and not the combustion chamber cover, if I didnt know the difference I shouldnt go any near the boiler. No im not corgi, but I am also not soft, I only ever check electrical connections (which I am more than qualified for), I removed the combustion cover to check the...

Sorry first chance I have had to post again, it is the case front panel as you see being removed in the diagram, there are no trapped wires, I have removed and repaced any connections, earths and pcb block connectors, still havnt put the front cover back on and no problems, I even tested the ch...

Just to confirm my thoughts I left the cover off all last night and no problems, messed about switching ch and dhw at different times during the evening, all ok. I then replaced the cover and it worked until this morning when I ran the shower and once again wouldnt ignite, removed cover and hey...

Only the internal combustion chamber door is sealed, not the outer case. I know, which is what makes it all the more strange?

When it dosnt work the boiler starts as normal you can hear the clicking of the electrode as normal but you dont get that rushing sound of the gas igniting, so this seems to be the failing point. With regard to the control panel, it dosnt seem to matter up or down, I thought it could be bad...

I do yes, the boiler cover not the internal flame cover

I have a Baxi 105e about 5 years old, the pcb was replaced about 5 months ago following its complete failure, and everything has been fine until the last few weeks, the boiler now only works when it wants, theres no pattern, whether its warm or cold, been used minutes earlier or not. It does the...