Recent content by Gjtrl855466

I will be adding an electric rad.

Hi mate, So the brick vents would help allow moisture to escape from the cavity which I’ve created between the battens and Celotex. By continuing the 1 inch gap across the floor and adding some kind of vent between skirting allows fresh air in and out the cavity. Probably way OTT I know. I...

I have a 4.3m x 3.4m outbuilding, single skin block & some brick. Floor has DPM under concrete, I’ve also done a DPL round corners & then self level. I have also gone round an drilled plenty of air vents. The plan: I have got plenty of 2x1 batten lengths so batten around room (DPM behind &...

So I got a single skin outhouse with a dpm below concrete and I’ve tanked it for good mesure. Plan was to 2x1 batten out walls at 400mm apart with a dpm strip behind & not touch the floor with them. Then 50mm PIR celotex over the top to create a small cavity (taping joints) then foil back...

Hi all, hoping someone can give me clarity on if my plan will work. I have a 4.5m x 3.5m single skin flat roof outbuilding which I’m planning to use as a bar/man cave. There is a DPM below the concrete & I have also tanked the walls & floor for good measure. my plan was to use 2x1 battens with...