Recent content by glasgowman

Hi thats what i thought it was to was a fast blow fuse...cant see it been anything else...

sorry worchester bosch 24i junor se combi

Hi mate wondering if you good help me ?

no heating no hot water...power to boiler but mechanical clock not make any sound..was working earlier this evening..i was trying to fit a wireless programmable room stat...How ever silly me forgot to un plug the clock from the board..I'm think i have blown a fuse on the pcb...any sugesstions ???

Hi there, You are right you are allowded a (4mbar) drop over 2mim,but experenices allways tells you that a tightness test confirms gas is sound before anywork is carried out there for shouls there be a fault with appliance you can inform the resonpbile person of the proplem and adviuce...

The Gas transporter deleivers the gas to the meter at 75 mbar..then the governour or regulator deleivers 21mbar to all appliances regardleess. Domestic gas meters supply 6m3 gas eater per hour thats it...If you have more than one appliance or maybe 2 and the new appliance is in the same...

Vokera compact HE Went to an old customer house tonite to fit a wirelss reciever to above boiler ok..try out wirelees reciever on my own boiler a worcherster junior and know proplem at all. Have checked wiring digram for boiler in bookelt..it shows only external time clock with volt free...

I have done it another way..guys.. Netural to Netural Com - Ls No - Lr link out and its working

hi there. I will tell you how i have installed reciever. On the boiler you have left to right control board Live,Netural,Space,Ns,Ls,Ns,Ls,Lr,Fv...Link in Ls and Lr taken out correct so far? Celect Thermsave DRF 3 wiring diagram on reciever as follows...1,2,3,4,5 blocks...Netrual (1)...

Hi thanks for reply to my message.. any suggestion mate?

I have a Worchester Bosch 24i junior combi boiler with a built in clock for heating great. Phoned Worchester about fitting a external wireless reciever with programme stat,They had told me that as long as it was 240v free there would not be a propelm. I have bought a celect Thermsave DRF3...