Recent content by glyntycerrig

Checked the fuse - it had blown, replaced it and all is back to normal !!!!!! don't know if that was the original fault, or was there a fault with the outside box???? anyway I have a new one, the other one had been up for 20+ yrs. many thanks everyone for your help. Blwyddyn Newydd dda...

The control panel in an Optima Compact

Thank you for the info. I have just carried that out . The strobe+ from the control box is now connected to the+ on the hold off on the alarm box which also has the +from the bell connected (D-D) and I still have the same problem. Also when I activate the control box I get the three PIRs I have...

My alarm was sounding for no apparent reason, no alarm or indication on control panel, fitted a new box -Reson8, no voltage on the hold off positive and negative, when I activate the alarm the three rooms with PIR's light up on the control box, any ideas????

I am replacing my Sonade2000 box with the Reson8, my old box started going off for no apparent reason, it wasn't sounding in the control panel and could not stop it without actually disconnecting the box. My old box had a + and - wires on the strobe, where the new one just has the - , I have...

My outside alarm started coming on without any indication on the control box, so after 20+years I thought it might be a good idea replace the box, so I bought a Reson8 to replace it. As with the old box there was a + and - to the strobe, on the new box there is only a - , do I leave the cable...