Recent content by Gogadget

got it working one of the brown cables was in the wrong point. so switched the one from the comm and l1 around and works great now. Apart from one slight thing, the switches are not in line when they are both on is this normal for a 2 gang switch as got 2 in the house and both are like it so...

Hi guys, just had a go at doing this and have a little problem with the bulb on the 2nd light keeps blowing. Have connected it as follows 3 Brown cables in connector block 3 Earth in connector block New light in L1 old light in L2 Switch in Comm with a loop between the 2 comm...

Thanks very much

Have taken a picture for you. It goes from the power to the switch and then to the light.

Hi, sorry not at the house atm so cannot see the switch. I do really want a 2 gang switch so can you just either take it direct from the switch or take the light from the light that is there and then add the switch last?

Hi guys, just had a go at doing this and have a little problem with the bulb on the 2nd light keeps blowing. Have connected it as follows 3 Brown cables in connector block 3 Earth in connector block New light in L1 old light in L2 Switch in Comm with a loop between the 2 comm...