Recent content by gracekel

thanks a lot, will go ahead

OK thanks, my worry was that the LED lights are 10w equivalent to 50watts and flood lights 30watts equivalent to 200watts I was looking at the equivalent rather than the original watts units

A lighting circuit run off a 6A type B with 30 LED Bulbs of 10 watts each, we are thinking of adding 6 additional LED Floodlight of 30 Watts each, can we use the same 6A circuit /. 1.0 mm cable(3 cores) used on installation can the connection be made from he point where the existing lamps are...

Hi, thanks,as it is or might be a power supply that failed,does it mean a board where the power socket goes need replacing as there seems to be 2 visible board only,maybe there is an hidden board somewhere (invertor

OK will do

I have an LG 47LD690 LCD TV ,47 inch there is a total black out, no sound no image, I tried to open the back cover ,there is no sign of any blown up capacitors, all the capacitors are flat and look ok, what could the fault be , so totally black just the red power light on the corner, the...

thank you , it is really helpful, I was connecting wrongly top /bottom, I have now done the triangle way,

Hi Taylortwocities, I have tried to re-connect, the light are back on but on the wrong way now , the living room light is now controllled by the switch down and up the stairs while before it was the light upstairs which was controlled by the switch down and up the stairs I have attached photos...

light switch replacement/confuse about wiring from dimmer to volex standard 2 gang way

I have just replaced a light switch, I have removed the 2 gang 2 way dimmer switch which has the following symbol L1 L2 Com top and (black wire in L1 and Red with black mark in Com) Com L2 L1 bottom (Red in Com, Blue in L2, Yellow in L1 Now I have a Volex 2 gang 2 way(white plastic) with...