Recent content by grahamdvd

Boiler seems to be fired up now ?

The boiler initially started up but has now gone off? The cylinder is cold ? Thanks

Right I've taken controller from wall so backplate is exposed and linked live to hw on ?

Hi everybody sorry I had to go away with work.I have multi meter in hand, so to check the cylinder stat?

Thanks yes I have a multi meter, I will check tomorrow and report back many thanks for all your help

Hi many thanks a stat seems the cheaper option to try?

Yes both was on at the controller, I then turned stat up and down you could hear the click of the stat but nothing from 3 port valve?

Ok I turned on both together hot water and heating and nothing seemed to make ve?

I put heating and hot water on, then turned cylinder stat up and down and nothing moved in the 3 port valve?

Heating is on and lever is loose

Hi I do have an immersion heater fitted but it's on a 30 min/1 hour/2hour switch which is a bit of a pain in the morning as can not be programmed.

Hi thanks, I have hot water only on the programmer and the radiators are not getting hot

Hi thanks yes the lever has resistance you can hear the whirl sound when pushed. The central heating is working too.

4073A thanks

Hi it's a Honeywell thanks