GreyRog's latest activity
-
GGreyRog replied to the thread Texecom Connect messages.Thank you. I think my next step is to trigger the alarm in full set mode and see if that sends a cloud message. That would be really all...
-
GGreyRog replied to the thread Texecom Connect messages.Thank you. I presume this needs engineer access.
-
GGreyRog replied to the thread Texecom Connect messages.Yes it was only part armed at the time it was triggered.
-
GGreyRog replied to the thread Texecom Connect messages.I have accessed the log remotely with the app. It said that the PIR was activated, then I reset it one minute later and the alarm was...
-
GGreyRog replied to the thread Texecom Connect messages.It was an inadvertent triggering of a PIR in the night. Pretty sure the outside alarm sounded as well as the internal. But nothing via...
-
GTexecom Connect was set up by the installer, and I get a message every time the alarm is set and unset. So far so good. But I don't...
-
GGreyRog replied to the thread Adjusting door height.I've given each hinge one full turn, and that seems to have been enough to lift the door off the step. As you said, the hinges have...
-
GGreyRog replied to the thread Adjusting door height.Thanks again. I'll report back.
-
GGreyRog replied to the thread Adjusting door height.That's great thank you. I didn't notice a grub screw but will have a closer look tonight. Just to confirm, turning anti clockwise is...
-
GThat's an SFS 2D hinge, height adjustment is from underneath, tightening the bolt will lift the door but looking at it they've already...
-
GGreyRog replied to the thread Virgin Media, driveway dig up..VM use contractors who shove in the cable in the quickest possible way and then speed off to the next job. They won't discuss it with...
-
GI've seen some other questions on this but they don't seem to be quite the same as mine. My door is binding slightly on the step and I...
-
-
GGreyRog replied to the thread Landline Query.You can try, but after so long it may not still be available. What you definitely won't get is your old copper landline connection...
