Recent content by GVC

thanx again for all the advice, turned out the c/u unit had been moved and the ring main had been cut joined together with choc blocks then a single 2.5 mm put in the choc blocks fed through the wall to the new c/u position and connected into the 32a breaker. All the choc blocks had melted the...

There is one netural and live and earth for the circuit, can't take a pic of the the breaker at present, but it is a CET 32A

thanks for the information, i have checked all the neturals in the C/U and tightened all the terminals on all the connections , including the neturals. no sign of arching,

The circiut with the problem is a radial supplying 13a sockets, wired in 2.5mm twin, at the consumer unit the breaker is a cet 32a mcb. Everything was working fine, plugged the kettle in , after a minute the kettle stop working, thought the mcb had tripped went to comsumer unit and mcb had...

It's one of Wickes own , don't know which model number though

I have fitted a mains fed mixer shower fed through a Worcester Greenstar HE plus combi boiler. On the bumf that came with the shower it says a 6:1 mix of cold to hot water is needed , but the water that comes out of the shower is scalding hot, Would fitting a Water Pressure Equalising Valve...