Recent content by Hammer1968

It's the Spirotech one I'm planning on fitting, as it's a little smaller than most it seems. Yes, the system does have corrosion, but I thought after draining and re-filling with inhibitor, then the filter would help in the long term too, the system is about 113 years old now and from my...

...for advice on the return pipe location. Pipework too short above my boiler for the 22mm fit. The Magnabooster2 is quite short from what I can see, but may have to go after the pump. Did either of you have any opinion or advice on using a reducer to fit it to the 15mm radiator...

...thought I was going to get some useful advice, must be on the wrong site then :( Well, either that or you feel you had to say something just because you can (which is frequently the case with these forums), or I'm assuming can contribute anything constructive... ...yea, think it must...

Thinking of fitting the Magnabooster2 filter. It is supposed to work best between the last radiator and the boiler? I was thinking of fitting it between my pump and the 3 port valve split to water and heating, as ease of access is ideal at this point. I assume fitting it anywhere in the...

I had this issue with my Baxi boiler also, a persistent clicking from the boiler while it tried to ignite, pilot flame visible throughout and the burner simply taking ages to light. I found removing the front panel casing also allowed the boiler start fully without any trouble. I'm with...