Make all down stair devices A & B
Make upstairs devices A
Now try hallway if correct should start entry time when you set with B setting
Are you setting area A ? Only upstairs will be on
If setting Area B then down stair will be on with upstairs off.
If programmed correctly ?
If code enter correctly this will be shown in event log.
If incorrect code entered this will not be shown in event log unless constantly enter to...
Code number will turn off system
The keypad lid tell you how to set and unset set system
5678 full will set alarm if that is the code.
If it is not the code then nothing will happen,but DO NOT keep trying different code numbers as this...
User default 5678 if not been changed by installer.
If code list then you will need to default control panel to reset user code.
Change the battery first.
A 19 year old battery is possibly the cause of your tamper fault.
You should've replaced battery before you started defaulting the panel. You may...
Yes you can just reset engineer code as long as control panel is NOT engineer locked.
You need to choose the correct camera for the application.
Buying cheap is not necessarily the right way to go.
Poor quality equipment will result...
New build ?
Is system under warranty?
Defaulting could void any warranty from installer.
Ask for price to install additional detector.
For the remote connectivity I prefer the Pyronix .
We install Texecom and Pyronix on a daily basis. Both of these control panel have a few niggles. Texecom software has some bug issues and the...
A system of that age most installers would recommend a system upgrade.
Get a few quotes so you can compare price and equipment specification....
Yes no problem with that
Separate names with a comma.