Recent content by Hitmanphil

Yes two core t&e to first alarm then a 3 core & earth to each of the others. On my last job I fitted the relay base onto the last alarm,fit the base first then the smoke just screws into that

You could use 20mm metal galv conduit to protect the cable

I thought you only need one relay base ? End of line then your LV cable back to the panel. And it's 230v now :p

Not sure on the price as I always get mine free depending on the spec of the gaffs I'm wiring :D

You might be better going to an electrical wholesaler and get 8 core stranded

If it's only a couple of Mts then yes you can otherwise like the other reply only crossing over

Hi guy's I've only just got around to fitting the alarm and sounder box,as the alarm is factory preset I done the usual things with the sensors and fitted them,tested to see if the sounder works and it does. Now my problem is the panel will not let me go into installer mode ?in the easy start...

Thanks for the reply

So far I've figured out (I think) that the sounder Ext - 12- Srn + 12v+ Z29 -T GND - T Where does the strobe and bell get wired to ??

Hello everyone new to the forum and need a little help. I have purchased a visonic complete wireless alarm system with the expander because I wanted the external sounder to be hard wired. I purchased the deltabell plus sounder and I'm confused as to where the wires correspond in each the...