Recent content by Hoover

Once the black plate is misshaped then the front cover wont fit properly. Each manufacture has recommendations on correct installation of there devices. Using fixing brackets (note some fixing brackets effective disable the back tamper). Using one side of the detector back plate in...

makes sense 2.04 wasnt out very long in fact dont remember seeing any 2.04's thanks for sharing.

ditto as long as you have an expander address free

If your not installing the system EightyTwo is spot on ask the installers to quote you and you can ask questions about the systems on here. You want something that more than one alarm installer installs in your area, as if things go wrong and the company you bought it from goes out of...

The best thing to do with a system is to write a list of what you want it to do. Out of that what is essential ie you wont compromise on. Find the best system/s that fits your needs, then ask some questions to make your mind up. There is lots of stuff out there.

How recent is recent? have you checked that its been put back together properly?

a picture might be useful. if thats at the panel d(0V) and c (tamper) are usually linked so the panel doesn't see the tamper from the bell box, b and c linked at the panel doesn't sound right to me.

When you say expanadable yes they are expandable. Like many things depends on what model you start with to how far you want to expand. The 24 panel or 640, 24(16 wireless) zones or 640(512 wireless) zones but cant see many domestics going up to the 640, thats a mansion. The Galaxy G2...

with the texecom panels, if you go for the posh looking keypads they have prox on them SMK/FMK other than that the kits come an a basic lcdp keypad (p) indicating prox. With wireless, avoid large metal objects, super thick walls (may have to bounce round the wall rather than go through it)...

it should be in the user manual

If you have done a user reset and the problem persist then you still have a tamper that needs clearing. Either the fault exists or its set for an engineer to reset it.

with sparkymarka on this. clearly you have mains power and battery power to the panel from what you have said, so the issue is with supply to the rest of the board keypads and pirs. all the fuses are rated, in your case they are banded for easy reference. I doubt you will have the spare...

looks good to start with I would have to check the tampers in the Nova manual To be certain on how the tamper is wired, I always keep it simple and install panels and bellboxs that are from the same manufacturer avoids any confusion or blame when crossing.

with europlex if you say why you want to do then the help given my be better solution to your needs. You can zone mimic, group zones together and mimic, and many many other scnarios for your outputs. Texecom even do a relay board for 8 outputs, which can be hard wired in the case of the...