Recent content by hoverjumper

Shame they don't tell you that when they sell you the pipe! I know, I'm s'posed to know these things :roll:

Took me a while, photos now appear above! :oops:

I re-plumbed an old shower with a new shower valve recently. After cutting an access hole in the partition wall, I replaced the old flexible braided pipes with plastic pipes. This morning, shortly after a shower, the hot water pipe blew off from the compression fitting on the shower valve...

Don't go for an open fire place. A stove like this is less messy and way more efficient... I installed a stainless steel flexible flue inside the chimney all the way up to the top. But you might not need to do this if you're sure your chimney is sound.

Many thanks TicklyT. You have confirmed my first thoughts which are to cut away a channel in the bottom of the cabinet for the waste pipe. Very useful info on the recommended fall of the waste pipe, I'll have to crawl behind the wall and make some measurements there. Lots of good...

Hi all, my first post on here. I've read a few other posts on the subject of toilet waste pipes but would welcome any opinions on my problem. This toilet was installed by previous owner and has never been a good flusher often requiring several flushes to clear the bowl. I've finally got...