So Sparkymarka are you saying perhaps it used to be a function in some 9800+ models but newer models may not support the chime function as a doorbell?
That seems to be to only explanation I can see as to why it’s in the user manual as a feature.
OK thanks Europlex can you advise how this is done or where in the installation/programming guide where I’d find how to do this this?
In engineer mode I’ve added the chime to zone/cct: 01, which is the door contact final exit zone. Other than that I’m at a loss..
Hi Europlex, luckily I have both manuals, user and the installation/programming one. But on page 16 of the user manual I followed the instrustions and put in my user code followed by no 7 and clear (Tick). So yes its set to chime in day mode when the front door (zone 1) opens which is working...
With all this being said I can’t see any instructions on the doorbell feature in the 9800+ Programming and installation manual.
But I do find the techy stuff harder to decipher..
Thanks for the heads up on the keypad part no. I was just trying to give you as much detail as poss .
I have a link to the user manual for the 9800+ that I’m looking at online which quotes the text I mentioned above on page 16...
hello
I have the above alarm all working fine except for the doorbell which is the Exit Terminate button in day mode. it’s says in the user manual, quote:
Turning the Chime On/Off
Your system may be programmed so that a chime tone sounds whenever certain doors are opened while the system is...