ipbr21054's latest activity

  • I
    ipbr21054 replied to the thread Issue with tow bar electrics.
    Led draw little current so the can bus system thinks a bulb is out.Usin gth etrailer board with bulbs fitted all is fine. So trailer...
  • I
    ipbr21054 replied to the thread Issue with tow bar electrics.
    Ok Tomorrow I’m borrowing a trailer boards with lights. LED don’t use much power so thinking can bus assume bulb is out.
  • I
    ipbr21054 replied to the thread Issue with tow bar electrics.
    Flash rate on my Suzuki with trailer is fine. Honda faster. My Suzuki is 2005 Honda is 2012 So I was wondering if the Honda can bus...
  • I
    ipbr21054 posted the thread Issue with tow bar electrics in Car Repairs / Maintenance.
    I'm looking to buy a HONDA CRV 2012 & have noticed that the electrical towing socket has 13 pins thus being what they call European. My...
  • I
    ipbr21054 replied to the thread EICR results question.
    The ECIR was done. He sent a report. Waited ages for a quote. Got another electrician to look at report quote and do it.
  • I
    ipbr21054 replied to the thread EICR results question.
    I’m not an electrician so I’m asking first is there is such a tool.
  • I
    ipbr21054 replied to the thread EICR results question.
    I’m not an electrician so this is why they are short.
  • I
    ipbr21054 replied to the thread EICR results question.
    I have a multimeter but leads are say 1 ft
  • I
    ipbr21054 replied to the thread EICR results question.
    The electrician did the test and left. I see the report & see on the quote how long apparently it’s going to take. I’m keen to look...
  • I
    ipbr21054 replied to the thread EICR results question.
    Selling property. I’ve changed some sockets over the years. Only EICR done otherwise I’m unaware of this.
  • I
    ipbr21054 replied to the thread EICR results question.
    Are you saying for me to check wire size & advise as the reading might be ok & he didnt recognise it. Thanks for your time.
  • I
    ipbr21054 replied to the thread EICR results question.
    not sure to be honest
  • I
    ipbr21054 replied to the thread EICR results question.
    Ok i will switch off electric & check all earths. I was thinking that there was a tool that you plug in the socket & when switched on...
  • I
    ipbr21054 replied to the thread EICR results question.
    Thanks. So the earth is the issue in this case. I suppose once ive done them all then there is no way i can check the reading & he will...
  • I
    ipbr21054 replied to the thread EICR results question.
    Looking at the paperwork he left under ring final circuits i see the following. I assume this is what your asking ? Thansk
    • EaseUS_2026_09_25_12_43_20.jpg
Show older items
Back
Top