Recent content by Jag Mann

Will a SLC do or does this needs a new layer of (65-100mm) concrete screed?

Really confused after a full power wash of the floor. Spend good 2 hrs pressure washing and the concrete does not look too strong, with a bit of pressure the top layer seems to chip away quite easily and also the water seems to disappear (soaked in I guess), I was expecting it to settle on top...

Fibre reinforced water mixed SLC it is then. But why so much price difference? B&Q have 20kg bag of NX range (3-50mm) for £12 but I have seen similar product in other brands for as much as £21 per bag? Does it make a difference?

Hi, I have a fairly even concrete floor (about 120 sq meter) but has some damage to it at places where the top chippings have come off in a couple of places (about 20mm deep), but in total this damaged area is just about 2 sq meter in the whole floor. anyhow I am planing on ordering slc but...

Hi, I am debating to use the current newley laid plywood floor as the finished surface in a small ofifice. Idea is to sand and stain the ply using polyurethane varnish with 3-4 coats. It will be a medium to heavy use area so concerned about the viablity of this solution. Total area is 18sq...