Recent content by Jamesd0ggye

Thanks for your previous help... shower working again (although pump seems to have stopped operating, will replace ahead if necessary).

Thanks for updating. Since last on the website I rethought and re-positioned the rear ceramic disc in the divertor unit. This seems to have corrected the problem and water flow can now be switched on/off correctly. The only slight issue is the water's too hot. I'll re-callibrate the spindle...

The part I fitted was brand new from the manufacturer and is named a "Retro Fit 4-way Divertor" and yes, I'd describe the item as a divertor spindle rather than a cartridge perhaps, essentially, the chrome/brass shanked unit fitted between the on/off shower handle and the hot/cold water inlets...

Hi vicvapour, not leaking no. Just that when the off leaver on the shower control is turned to the off position, it does not stop the water pouring from the shower and bath (as if it were being used full power) at the same time. When I cut off the mains feed in the loft, it stops the water. Even...

We've a problem with our Hudson Reed A3006 Tec Twin shower with built in diverter/fixed shower head above. The shower and bath won't switch off. I waited until the tank emptied and shut off the cold water supply and later fitted a new diverter cartridge but it's not made any difference. Any...