Recent content by jasoningon

Hi, Just had a lad re position radiator pipes ready for my new radiators. He capped off both pipes however when I put the central heating on this morning I noticed both capped pipes are cold ? Is this normal when no radiators are attached ? Or could he have installed a valve under the floor...

it’s to judge how much extra to to pay for another 800mm depth over 20meters. Thanks for your input if you have any idea

Originally the depth was supposed to be 1meter which my proposed builder had quoted me for but building control have advised that We go another 800mm as a nearby tree is within 8 meters of the foundation. Does anybody have a rough estimate on how much extra the builder is likely to charge on the...

Just trying to gage how long it will take with Two experienced operators ?

Thanks for the reply

My strip footings are 20meters x 1300mm deep x 600mm wide, there will be two men, 1.5 ton digger & skip loader, the skip and footings are within 10 meters so no access restrictions at all. Could someone please give me an idea on how many days in dry weather this should take ? Many thanks

Thanks for your help will correct it tomorrow

On the hive terminals I put Brown to Live, Blue to Neutral on the lower core flex, Then Earth to earth and Live to (1) common on the second core flex, but the boiler will not come on but the receiver does when paired with the thermostat ? Should the second core live go to (3) on the hive then ?

Hii advice needed, I am wiring in a hive receiver for my Sister on her combi boiler to replace the existing thermostat and receiver. The wiring in the first picture is how it is wired in at the moment. It appears to be wired from the boiler and the fuse switch. Would somebody please advise which...