Recent content by jaykay2

Hi Guys! Just added another picture to show the length, http://i57.photobucket.com/albums/g209/jaykay2_photos/wideworktop.jpg i had already cut the other end, so this one had to be the final precise length cut, which i pride myself on getting exatly right apart from the obvious...

Thanks for that! I think we had resigned ourselves to adding a triangular bit as well, you live & learn as they say, you would think at 59 i should have learnt by now! I still do not understand how it occured & need to understand for future reference thanks again for the good advice I...

Thanks for that! I think we had resigned ourselves to adding a triangular bit as well, you live & learn as they say, you would think at 59 i should have learnt by now! I still do not understand how it occured & need to understand for future reference thanks again for the good advice I...

HELP please can someone tell me what went wrong? see picture at http://i57.photobucket.com/albums/g209/jaykay2_photos/90d33e6c.jpg and http://i57.photobucket.com/albums/g209/jaykay2_photos/DSCF1635.jpg cut the female joint with the jig & router on the right hand top, then laid it over...

Just looked at the plate on the OLD cooker it says 9.82Kw so i guess that the wiring will handle it!! but i know in this game you do not guess as for the size of wiring the total width of the cable is 13mm and each of the power wires is 6 strand solid copper, how else do you tell? thanks again...

Hi, I have just removed a stand alone cooker & i want to wire in a seperate oven 1.2Kw & hob 6Kw. question is can i wire them both onto the wiring that was connected to the removed cooker? the seperate fuse for this wiring is 32amp many thanks for any sound advice john