Recent content by jhs1954

The only indicators I see are flashing lights, I can see no error codes there is no digital display at all.. ok... with the 2 red lights flashing the results for the green start light when pressing start twice is: 12oclock nothing nothing 1oclock nothing green flashing...

will check this out tomorrow cheers

I guess I haven't checked the circulation pump, how do I get to it? on the other stuff... no permanent green light at all only flashing green at 1 an 2 oclock 3-11 oclock = no green start light at all. plate shows G977 plus Type HG01 No:40 / 84972787 re my comments on...

ok have rechecked the pump blades ( the one that sits in the sump, you have to get rid of the ballbearing housing to see it) blades all good , clean. resistance felt turning on every second blade, feels magnetic). So is it likely to be the pressure sensor. (Just as a footnote Miele...

sorry with the flashing green start light the other lights are flashing as well (drain/inlet and salt)

The inlet/ drain and salt flash red together. Start light off then at 1 o clock the start light flashes on and off (green light)

Thanks for helping! did what you suggested.. with the button sequence then start light flashes green at 1 o clock didn' try anything else, i.e other clock positions

Symptoms: Program starts water fills washing goes on... then 7mins into the cycle the light comes on. everything stops What I have done: removed the base. No sump water, all dry inside. removed and cleaned all possible filters inside and the ball valve. Removed hoses blew through, no...